The list of supported TV boxes is located in the configuration file of the Armbian system is /etc/model_database.conf, and the configuration file in the OpenWrt system is /etc/model_database.conf.

Where the value of BUILD is yes, it is the system of some boxes packed by default, and these boxes can be used directly. The default value is no, and these unpacked boxes need to download the same FAMILY packaged system (it is recommended to download the 5.15/5.4 kernel system). After writing to USB, you can open the boot partition on USB on the computer, modify the dtb name of FDT in the /boot/uEnv.txt file, and other boxes in the adaptation list.

For users who perform custom compilation in the fork source code repository, if their device is not in the default packaging list, they can modify no in BUILD to yes, and set a unique value for BOARD to directly package their own device. The unique value added to BOARD can be used independently when packaging system, for example, ./rebuild -b s905x3 will generate the Armbian system corresponding to s905x3 configuration, You need to add BOARD to armbian_board option in the workflow control file when compiling separately in github Actions. When building all, BUILD is yes, all will be packaged.

支持的电视盒子列表在 Armbian 系统中配置文件的位置为 /etc/model_database.conf，在 OpenWrt 系统中配置文件的位置为 /etc/model_database.conf。

其中 BUILD 的值是 yes 的是默认打包的部分盒子的系统，这些盒子可以直接使用。默认值是 no 的没有打包，这些没有打包的盒子使用时需要下载相同 FAMILY 的打包好的系统（推荐下载 5.15/5.4 内核的系统），在写入 USB 后，可以在电脑上打开 USB 中的 boot 分区，修改 /boot/uEnv.txt 文件中 FDT 的 dtb 名称，适配列表中的其他盒子。

对于 fork 源码仓库进行自定义编译的用户，如果自己的设备不在默认打包列表，可以修改 BUILD 中的 no 为 yes，并给 BOARD 设置 唯一值，实现直接打包自己的设备。给 BOARD 添加的 唯一值 在打包 Armbian 系统时可以独立使用，例如 ./rebuild -b s905x3 生成 s905x3 配置对应的系统，在 github Actions 进行单独编译时需要把 BOARD 添加到工作流控制文件的 armbian_board 选项中。全部打包时 BUILD 为 yes 的会全部打包。